Pages: 1 2 3 [4] 5 6 ... 10
31
« Last post by djacobsen on October 05, 2025, 08:06:14 am »
Hello & Welcome to the Forum! Here's a link to Lionels' available motors & parts https://www.lionelsupport.com/search?keywords=Replacement%20motors
32
I'm need a replacement dc can motor for my Lionel James Gang locomotive.
33
« Last post by vicsrc on August 17, 2025, 03:59:45 pm »
can the sound be reprogrammed?
34
« Last post by Loco1664 on August 06, 2025, 12:33:46 pm »
I am in the process of refurbishing the Lionel 1041 transformer from my childhood pre-war Lionel train set that my brother and I played hard with. Somewhere along the way, we removed the Reversing switch, the one with the red push button, and I want to replace it with whatever will work. Therefore, I need to know how it was wired. Any help, please. Karl in Warren, MI
35
« Last post by Loco1664 on August 05, 2025, 02:08:02 pm »
My Lionel #1045 Flagman took a beating back in the 1940's when my brother and I were kids. I just found my old Lionel train set along with this Lionel accessory that was wrapped up Detroit newspapers, The Detroit Times, dated December 1954, packed away in my basement! That was a long time ago and now I would like to get that old train set out and working for our great grandsons to enjoy like my brother and I did years ago. The 1045 Flagman that is made from plastic, is broken from its metal stand, opened up exposing the right arm with a metal shaft and weight. All electrics are missing. I would like to know what these were so I can replace them. I suspect a solenoid or some such thing that I could make could work. Any ideas or best yet, a photo of what was inside of the Flagman. I have everything else in the base including the 1045C tract connector. My brother would be proud! Thanks guys, Karl
36
« Last post by kquass on June 22, 2025, 06:22:02 pm »
I have a Lionel Atlantic 4-4-2 Milwaukee Road locomotive, paired with a Lionel tender marked “2671W-6” and “THE MILWAUKEE RAILROAD”. The tender and locomotive each have a single wire tether that connect the two. (I have a Lionel type RW transformer (speed/voltage control, Direction and Whistle buttons). When the two are tethered, and the locomotive is moving, the tender produces chuffing sounds. Does anyone recognize the type of tender circuit board? Should it be capable of producing a whistle sound? Here’s what I know - The transformer speed control produces variable AC voltages as expected. The Whistle button doesn’t result in a whistle sound; while pressed it increases AC by ~2.0 V, and adds ~0.5 V DC. I’ve tried adjusting each of the 2 blue variable resisters, but it had no effect on the chuffing sound, and still no whistle. Any suggestions for getting a working whistle would be appreciated.
37
I have a Lionel an 8690 Trolley, it was running great up to a couple of weeks ago. The trolley started to stop suddenly in one direction. It appears there is a bind in the wheels. I cleaned and serviced the motor, checked for bent axels, put new brushes in and lubricated it as per manual. It still stops in one direction but runs great in the other. The wheels still lock up as though there is bind in the motor, axels or gears, but I cannot find anything out of alignment. Does anybody have any suggestion?
38
« Last post by cyberskald on April 06, 2025, 05:28:14 pm »
Recently picked up a Lionel TMCC N&W J Class 600 that needs the 6 pin connector rewired. I checked for the diagrams online, but I couldn't seem to locate what I need for it. If anyone can send me a wiring diagram of the 6 pin connector or send a picture of their 6 pin connector, it would be greatly appreciated!
39
« Last post by mtnman1 on March 23, 2025, 01:48:39 pm »
Hi Dockside Yes the rubber stamped numbers over the years do get rubbed off. I have a tank car that I cant identify because someone put a price tag right on it and the glue has blurred it. Search the different ones on the internet and try to match the one you have with what you find. There may be more than 2 but 2 was all I could find.
40
« Last post by dockside on March 21, 2025, 12:40:25 pm »
Hi mtnman, Not for sure. I just paired with 681 engine. The info I came up with, that engine had a 6-wheel tender. I guess it's got to be a 2426W or a 2671W that you mentioned in your replay. I could post a picture, if you would like to see it. I have looked it over many times and there is no number amy place on it. I guess it cot rubbed off somehow. Dockside
Pages: 1 2 3 [4] 5 6 ... 10
|
|
|
Pre war lionel paper weight
by Aentveditor
March 07, 2026, 02:29:10 pm
|
Reassemble of a Lionel 313 Bascule Bridge
by WestPAKid
March 02, 2026, 06:37:34 pm
|
Re: Horn Operation in Santa Fe diesel??
by mtnman1
February 08, 2026, 11:12:59 pm
|
Re: Horn Operation in Santa Fe diesel??
by mtnman1
February 08, 2026, 11:08:53 pm
|
1972 Lionel 6-8111 DT&I Repair and Modification
by Gary M
February 07, 2026, 09:19:20 am
|
|
|
|
Donate to LTF Here
|
|