Lionel Train Forum - Lionel Trains




Author Topic: Wistle tender control  (Read 1625 times)

JohnnyZ

  • Junior Member
  • **
  • Posts: 15
    • View Profile

  • Total Badges: 8
    Badges: (View All)
    10 Posts Level 2 Combination
Wistle tender control
« on: November 20, 2017, 07:11:30 pm »
Hey all,
Heres my question. My son was given a 1060 lionel. I beleive from the early 60's. It currently has a 1026 controller.

I just recently purchased a 2018 264 off eBay. I believe that one's from the early 50s. I also just got hold of a whistle tender that was appropriate model for that year.

I need some help to figure out what  controller I should use with the 2018 and whistle tender on the current track I have. There's so many out there it's very confusing for the post-war controllers could somebody please help me thank you.
« Last Edit: November 20, 2017, 07:13:38 pm by JohnnyZ »

Share on Facebook Share on Twitter


TrainLarry

  • Moderator
  • *****
  • Posts: 491
    • View Profile
  • Scale(s) Modeled: 0 scale

  • Total Badges: 19
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary
Re: Wistle tender control
« Reply #1 on: November 20, 2017, 10:07:53 pm »
A good transformer to start with is the 1033.
http://www.tandem-associates.com/lionel/lionel_trains_1033_transformer.htm
It will easily handle one train.

If you are looking in the future to possibly run more than one train on multiple loops, then a KW would be recommended.
http://www.tandem-associates.com/lionel/lionel_trains_kw_transformer.htm

For more than 2 trains, or if you will get accessories, than the ZW is king.
http://www.tandem-associates.com/lionel/lionel_trains_zw_transformer.htm

All have a whistle controller, with the ZW having two.

Larry

JohnnyZ

  • Junior Member
  • **
  • Posts: 15
    • View Profile

  • Total Badges: 8
    Badges: (View All)
    10 Posts Level 2 Combination
Re: Wistle tender control
« Reply #2 on: November 21, 2017, 04:42:27 am »
Thank you Larry,

JohnnyZ

  • Junior Member
  • **
  • Posts: 15
    • View Profile

  • Total Badges: 8
    Badges: (View All)
    10 Posts Level 2 Combination
Re: Wistle tender control
« Reply #3 on: November 29, 2017, 04:47:48 pm »
Hey guys, I'm having trouble getting my 1033 controller to run my 2018 steam locomotive and my whistle tender what do I have to do to make it work?

TrainLarry

  • Moderator
  • *****
  • Posts: 491
    • View Profile
  • Scale(s) Modeled: 0 scale

  • Total Badges: 19
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary
Re: Wistle tender control
« Reply #4 on: November 29, 2017, 05:30:46 pm »
The 1033 transformer should have no problem powering your 2018 and tender. It should also blow the whistle quite loudly, provided (1) the whistle rectifier disc in the 1033 is good, and (2) the whistle in the tender is in good shape - specifically the motor. It may need to be serviced with a good cleaning and oiling of the bearings.

Clean the loco motor and wheels with naphtha, and lubricate the armature bearings with a light hobby oil. Use a hobby grease on the gears.
http://pictures.olsenstoy.com/cd/locos%5Cdebpix05.pdf

Clean and lube the whistle tender and its motor in a similar fashion.
http://pictures.olsenstoy.com/cd/locos%5Clen6026a.pdf

When all is cleaned and lubed, the 1033 should run the loco and tender with power to  spare. If it does not, there may be a problem with the transformer.

The tender whistle should blow loudly also. If not, the whistle rectifier disc may need replacement in the transformer.

Larry
« Last Edit: November 29, 2017, 05:35:52 pm by TrainLarry »

JohnnyZ

  • Junior Member
  • **
  • Posts: 15
    • View Profile

  • Total Badges: 8
    Badges: (View All)
    10 Posts Level 2 Combination
Re: Wistle tender control
« Reply #5 on: November 30, 2017, 04:56:25 am »
It sounds like the wistle tender is buzzing. And the 2018 will not move. I had cleaned and lubed everything like you said. Maybe I have it wired up wrong? Or do I need a different track connector? Is there a wiring diagram somewhere?
« Last Edit: November 30, 2017, 04:59:29 am by JohnnyZ »

TrainLarry

  • Moderator
  • *****
  • Posts: 491
    • View Profile
  • Scale(s) Modeled: 0 scale

  • Total Badges: 19
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary
Re: Wistle tender control
« Reply #6 on: November 30, 2017, 06:19:21 am »
Connect the 'U' and 'A' terminals of the 1033 to the track lockon.
If you are getting power to the track, the track and wiring are good.

If the loco will not move, it is possible that the 'E'-unit is locked in neutral. Move the lever on top of the engine, turn the power on and off a couple of times, and see if it moves. If it still does not move, you may either have a faulty 'E'-unit or a problem with the loco.

The buzzing in the tender sounds like the relay. If the whistle does not blow, then either the whistle motor needs servicing, or the whistle rectifier in the 1033 transformer may be bad.


Larry

JohnnyZ

  • Junior Member
  • **
  • Posts: 15
    • View Profile

  • Total Badges: 8
    Badges: (View All)
    10 Posts Level 2 Combination
Re: Wistle tender control
« Reply #7 on: November 30, 2017, 08:11:48 am »
The loco does work, by itself. The wistle tender works, by itself and when pulled with my 1060 loco. I just cleaned the e-unit. I have a new one on order. Both the 2018 and wistle unit work. Just not together. And the 2018 changes direction when I cycle the power with out issue.

TrainLarry

  • Moderator
  • *****
  • Posts: 491
    • View Profile
  • Scale(s) Modeled: 0 scale

  • Total Badges: 19
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary
Re: Wistle tender control
« Reply #8 on: November 30, 2017, 03:10:44 pm »
You are saying that the whistle tender will not blow when pulled by the 2018 loco using the 1033 transformer?

That is strange. Do you have another transformer to try out the trains together?

The only thing I can think of about the 1033 is that the circuit breaker may be faulty and not letting full power to the track.


Larry

JohnnyZ

  • Junior Member
  • **
  • Posts: 15
    • View Profile

  • Total Badges: 8
    Badges: (View All)
    10 Posts Level 2 Combination
Re: Wistle tender control
« Reply #9 on: November 30, 2017, 03:40:28 pm »
OK!!! WTF. I guess Larry fixed my train problem vicariously.( He must be the train wisperer!😊)  It's all working AWESOME now.

Thanks Larry

TrainLarry

  • Moderator
  • *****
  • Posts: 491
    • View Profile
  • Scale(s) Modeled: 0 scale

  • Total Badges: 19
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary
Re: Wistle tender control
« Reply #10 on: November 30, 2017, 04:10:02 pm »
You're welcome.

Enjoy your trains.


Larry

 

Related Topics

  Subject / Started by Replies Last post
4 Replies
507 Views
Last post January 13, 2022, 05:49:07 pm
by smaricic
0 Replies
275 Views
Last post January 15, 2022, 07:14:22 pm
by Salkeldr

Member Photos

Recent Threads

Lionel 0288 Coaling Station by Tom
March 15, 2024, 10:10:23 pm

Estate Sale, Huge Collection, Original Boxes by x78163
March 14, 2024, 04:15:45 pm

Re: Lionel ps by Trainzlover44
February 12, 2024, 10:36:14 am

Lionel ps by Trainzlover44
February 12, 2024, 10:01:26 am

Lionel flying Yankee whistle by Gtp2002
February 10, 2024, 12:02:46 pm

Menu


Donate to LTF Here

Lionel Trains

Lionel Train Forum - Model Train Forum

©2012-2023  LionelTrainForum.com