Author Topic: wiring railyard (Read 29165 times)

dsodano · « **on:** May 03, 2020, 06:46:03 am »

I am new to model railroading I designed a layout I would like to build I am not sure how to wire the switches any help would be appreciated I plan on running in conventional mode for now

[ Attachment Invalid Or Does Not Exist ]

TrainLarry · « **Reply #1 on:** May 03, 2020, 10:27:35 am »

Welcome to the forum!

That is a nice layout you have planned.
I'm presuming you are asking how to wire the switches for normal operation. The instructions will be in the box with the switch, but here is a copy of the instructions for you to read beforehand. Page 9 explains how to hook up the controller to the switch. Page 8 explains how to power the switches with a separate power supply.
https://www.lionelsupport.com/media/servicedocuments/71-2045-250.pdf

Hope this helps, and enjoy building and operating your pike!

Larry

dsodano · « **Reply #2 on:** May 04, 2020, 09:29:04 am »

Thanks for the response my real concern is do I isolate the individual switches with block sections to prevent feedback

TrainLarry · « **Reply #3 on:** May 04, 2020, 10:00:05 am »

I don't see any problems with feedback. Just keep all the insulating pins in the switches as they are from the factory and you should be set. When you build the layout, you will see how the switches work normally.

Larry

Lionel Train Forum

News:

Author Topic: wiring railyard (Read 29165 times)

dsodano

wiring railyard

TrainLarry

Re: wiring railyard

dsodano

Re: wiring railyard

TrainLarry

Re: wiring railyard

Related Topics

Member Photos

Recent Threads

Menu