Is it possible for Lionel track to go bad? I just bought modest load of used Lionel stuff on ebay, and the locomotive runs on sections of track, but stops when I add too many sections. It won't run at all when I have a complete circle, oval, figure 8, whatever--no matter how small the circumference. I used Emory cloth to clean the top of the rails. Can you suggest anything else?
What lionel track are you using and what engine are you using.
Guyster
Hello & Welcome to the Forum!
Oh! The pain of used track.....
Okay, you purchased a "load" of used track off an online auction site,
first thing you need to do is clean the connector pins & holes they fit into, your Emory cloth will work for that.
I'm guessing that you have tubular track, so after cleaning the pins & holes, you'll want to make sure the pins fit tightly into the holes of the joining track. You can use a needle nose pliers to crimp the track below the holes and pins, if you don't have a pair of track pliers, to tighten/crimp the track.
You don't say if you have rusty track, so will just recommend your basic track eraser to clean your rail.
A green scotch bright pad is used by some people, but if you use one to clean your track, do it somewhere that the dirt/mess/crud that you will create does not annoy "She Who Must Be Obeyed" (SWMBO).
DO NOT DO IT ON HER CARPET, KITCHEN TABLE OR ANYWHERE ELSE SHE MAY BE UPSET ABOUT!!!
Do Not use Steel Wool to clean you track, that creates little bits of dirty steel wool that can & will ruin your locomotive. Remember elementary school science class where they spread iron filings on a piece of glass and moved it about with a magnet? Think big magnet shaped exactly like your locomotive...........
You will also want to make sure your wheels and pickup roller or slider, which ever your locomotive has are clean.
You can lubricate the pickup roller with a small drop of electrical conductive oil on each side of its' axle. Also good time to lubricate your locomotive & axles on your cars, use small drops of a light plastic compatible oil.
You can use heavy aluminum foil to clean off some of the oxidation on the rail head, leave the rest..
Natural weathering, ya' know.....
Some of my track is 75+ years old and works just as good as the brand new stuff, it just isn't all shiny..
Happy Rails!
Dave
Thanks For the responses--esp. For Dave's extensive clinic! And it seems like I have a bit of bench work ahead of me, in order to get the track in shape
. The track is the classic, old stuff and is oxidized but not rusty. The locomotive appears to be the cheapest option for its era. I bought the "set" for my 4.5 year old boy to get started with trains. My dad was a fanatical model railroader, who, during my childhood, tried, unsuccessfully, to recruit me into the fold. Now that I am older, I find I have a fondness for it, but I am an amateur!
Guy
[ Attachment Invalid Or Does Not Exist ]
Guy,
your little 8625 is a good basic beginner locomotive, just make sure to clean the wheels and pickup roller & lubricate it.
It's post 1970 production, I'm guessing MPC era.
I added a little to my original reply, so you my want to reread it.
If you have any other problems or questions don't hesitate to ask.
Happy Rails!
Dave
Guy,
Welcome to the Forum! Hope your boy enjoys the new train setup once she's up an running!
Dave, thanks again for all the detailed advice, and I'll be getting to my maintenance work directly. And, thanks to the others for their interst and welcoming messages. Guy
Guy,
If you haven't read them yet, I would suggest you read through the pinned threads in the
Lionel Maintenance & Repair sub-forum. There's lot's of good information & tips there.
Happy Rails.
Dave