hi ... just joined this forum. Trying to get back into the hobby. I bought a milk car and coal dump car ... and a 5 rail track (UCS-6) and 2 button controller. Hooked everything up and if i turn up the throttle on the transformer, all works just fine. But I realize that the throttle needs to be turned up to create power to operate these accessories. So I tried to wire to the 14 volt A and C terminals on the transformer for fixed voltage. Again, works fine. But then I realize that with a locomotive, even with the throttle off, a little power seems to be leaking through. It would seem it would be desirable then to modify the controller track so physically disconnect any connection between the 4 wires and the rails so there is no possibility of interference. Any idea how this can be done?