Lionel Train Forum - Lionel Trains




Author Topic: Lionel 239  (Read 2182 times)

FlyersHockey

  • New Member
  • *
  • Posts: 4
  • Location: Pennsylvania
    • View Profile

  • Total Badges: 3
    Badges: (View All)
    Topic Starter Level 1 First Post
Lionel 239
« on: January 06, 2021, 02:58:31 pm »
I'll start by saying I am completely clueless to most of this.  I've had several model trains as a kid and have one HO now that really only sees daylight around Christmas.  I love the hobby just don't have much time.  Anyway to my question.

My dad had a Lionel 239 set.  I'll include pictures.  I'm 36 and it has never run in my lifetime.  His best guess is that the last time it ran was the early 70s.  I had it repaired at Draude's Derailment in Lebanon, PA. 

I can't seem to get it running.  The original power pack or whatever it's called doesn't work.  I'm using one of two that powered a Disney Lionel set from the early 90s.  It seems like it wants to go but just not getting enough power.  The track isn't great, but the other ones I have run ok on it.  I'm not sure if the weight of the metal locomotive is weighing it down.  I also noticed the old/original power pack says AC only whereas the one from the 90s has AC and DC terminals.  The locomotive itself doesn't say anything.  I'll include a picture.  I know it's not the matching tender.

It's almost like I need more power to get it going.

Share on Facebook Share on Twitter


FlyersHockey

  • New Member
  • *
  • Posts: 4
  • Location: Pennsylvania
    • View Profile

  • Total Badges: 3
    Badges: (View All)
    Topic Starter Level 1 First Post
Re: Lionel 239
« Reply #1 on: January 06, 2021, 02:59:24 pm »
Pictures

FlyersHockey

  • New Member
  • *
  • Posts: 4
  • Location: Pennsylvania
    • View Profile

  • Total Badges: 3
    Badges: (View All)
    Topic Starter Level 1 First Post
Re: Lionel 239
« Reply #2 on: January 06, 2021, 03:01:37 pm »
It won't let me add pictures in guessing there is a minimum post requirement?

TrainLarry

  • Moderator
  • *****
  • Posts: 491
    • View Profile
  • Scale(s) Modeled: 0 scale

  • Total Badges: 19
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary
Re: Lionel 239
« Reply #3 on: January 06, 2021, 04:22:40 pm »
The 239 is a 'Scout' engine and was made with a unique Bakelite-bodied motor with a unique reversing system. They were low-end entry-level locomotives that were known to run erratically. They were not really made to be serviced, although they could be.
https://www.tandem-associates.com/lionel/lionel_trains_239_loco.htm

The original transformer may have been a 1073 which, at 60 watts, should get the loco to run.
https://www.tandem-associates.com/lionel/lionel_trains_1073_transformer.htm

Use the AC terminals on the 4060 transformer you have.


Larry

« Last Edit: January 06, 2021, 04:51:33 pm by TrainLarry »

FlyersHockey

  • New Member
  • *
  • Posts: 4
  • Location: Pennsylvania
    • View Profile

  • Total Badges: 3
    Badges: (View All)
    Topic Starter Level 1 First Post
Re: Lionel 239
« Reply #4 on: January 06, 2021, 10:43:01 pm »
Thanks for the help.  After reading I never realized it was a cheaper model.  I thought because it was metal that it was a better quality.  I tried just the AC terminals.  It still seems like it wants to go but doesn't.  I'm wondering if the track is the issue.

TrainLarry

  • Moderator
  • *****
  • Posts: 491
    • View Profile
  • Scale(s) Modeled: 0 scale

  • Total Badges: 19
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary
Re: Lionel 239
« Reply #5 on: January 06, 2021, 11:29:42 pm »
Because of the loco's motor design, all the wheels and the track have to be very clean. Use Naphtha on a rag to clean everything as best you can and use a ScotchBrite pad to shine the wheels and track. Go over everything again with the Naphtha to clean off any residue.

Bypass the track. Hold the loco in one hand right side up and connect one wire from the transformer to a roller pickup. Turn on the power and touch the other transformer wire to one of the drive wheels. The loco should run. If not, move the reverse lever on top and try again. If the loco does not run, chances are the motor is in need of servicing. Not a fun project.

The attached service manual gives you a parts view of these unique motors. The wheels on one side need to be pulled off, and there are two metal clips on either end that hold the motor case halves together. Inside the motor is a handful of never seen before parts that need to go together precisely in the right order without flying out. You need tons of patience and 4 hands to reassemble the motor and get it to work.

I have repaired a number of these locos, and I cringe just remembering the multiple times it took to take apart and reassemble the motor until it ran.

If you still feel up to it, go at it. You have been warned.


Larry

 

Related Topics

  Subject / Started by Replies Last post
0 Replies
4373 Views
Last post October 05, 2023, 07:17:38 am
by DCBUS
0 Replies
31 Views
Last post March 15, 2024, 10:10:23 pm
by Tom

Member Photos

Recent Threads

Lionel 0288 Coaling Station by Tom
March 15, 2024, 10:10:23 pm

Estate Sale, Huge Collection, Original Boxes by x78163
March 14, 2024, 04:15:45 pm

Re: Lionel ps by Trainzlover44
February 12, 2024, 10:36:14 am

Lionel ps by Trainzlover44
February 12, 2024, 10:01:26 am

Lionel flying Yankee whistle by Gtp2002
February 10, 2024, 12:02:46 pm

Menu


Donate to LTF Here

Lionel Trains

Lionel Train Forum - Model Train Forum

©2012-2023  LionelTrainForum.com