Author Topic: Coupler attachment to baseplate (Read 9281 times)

njjrjohn · « **on:** January 02, 2020, 05:47:35 pm »

Is it possible to reattach a coupler to the baseplate? What type of pin would be used to do this?

TrainLarry · « **Reply #1 on:** January 02, 2020, 06:08:45 pm »

Once a coupler assembly comes loose from the baseplate, it needs to be replaced. The new coupler assembly has a nib on the bottom which gets peened over to keep it in place. The easiest thing to do is to replace the complete baseplate assembly.

What is the stock number of the rolling stock in question?

Larry

njjrjohn · « **Reply #2 on:** January 02, 2020, 07:05:13 pm »

Thanks Larry! Th3e stock number for the car is 36621; milk car.

njjrjohn · « **Reply #3 on:** January 02, 2020, 07:13:01 pm »

Hi, Also, I have a Breakman's Riviter set with a Knuckle Coupler Riviting Tip, a Shoe/Armature Spring Tip and a BR-1 Marking Tip. Would any of that be usable for penning in a new rivet?

TrainLarry · « **Reply #4 on:** January 02, 2020, 07:53:15 pm »

The tool set you have should do the job, but it would be easier to just replace the entire baseplate assembly.
https://store.justtrains.com/483-2-Base-Plate-Coupler-Slide-Shoe_p_1603.html

Larry

Lionel Train Forum

News:

Author Topic: Coupler attachment to baseplate (Read 9281 times)

njjrjohn

Coupler attachment to baseplate

TrainLarry

Re: Coupler attachment to baseplate

njjrjohn

Re: Coupler attachment to baseplate

njjrjohn

Re: Coupler attachment to baseplate

TrainLarry

Re: Coupler attachment to baseplate

Related Topics

Member Photos

Recent Threads

Menu