Author Topic: Lionel #3512 rotating light pulley (Read 622 times)

steina01 · « **on:** May 25, 2015, 09:35:17 am »

Hi,
I am rehabing a 3512 fire ladder car. Just got the rubberband which connects the rear axles to the pulley to activate the system, but can't figure out just how it should be attached.
Can anyone help with this?
Thanks,
Alan

TrainLarry · « **Reply #1 on:** May 25, 2015, 10:25:34 am »

The bottom of the service manual page shows how the drive belt is attached around the axles and the drive pulley.
http://pictures.olsenstoy.com/cd/opcar%5Coc3512p2.pdf

Remove one end of the wheels, slide the belt over both axles, twist the belt 180 degrees, and stretch it over the pulley. Reinstall the wheels and it's done.

Larry

steina01 · « **Reply #2 on:** May 25, 2015, 03:19:26 pm »

Thanks Larry. I had found that sheet but did not scroll down far enough to see the sketch of the attachment of the rubber band.
Alan

Lionel Train Forum

News:

Author Topic: Lionel #3512 rotating light pulley (Read 622 times)

steina01

Lionel #3512 rotating light pulley

TrainLarry

Re: Lionel #3512 rotating light pulley

steina01

Re: Lionel #3512 rotating light pulley

Member Photos

Recent Threads

Menu