Lionel Trains - Lionel Train Forum - Model Train Forum
Lionel Trains Workshop => Lionel Maintenance & Repair => Topic started by: undercover on December 27, 2020, 11:51:31 am
-
Here is a small horn board, but you need to supply a speaker.
https://www.dallee.com/HiLine-Stamp-Diesel-Horns-Bells-1570
Larry
-
Used is how I got it but it looks stock. Thanks. Grain of wheat ordered. Any idea if I can put a horn in here while I’m in there?
Sent from my iPhone using Tapatalk
-
Indeed every reference to that bulb number shows a screw base bulb.
It may be possible you have a locomotive where the original screw base bulb was replaced with the grain-of-wheat bulb.
Did you get the loco in a sealed box, or was it used?
Here are 12-16 volt grain-of-wheat bulbs.
https://www.hobbytown.com/model-power-1216v-clear-grain-of-wheat-3mm-bulb-3-mdp381/p378627
Larry
-
The lamp is #18-5101-139 in the Operating Instructions.
https://www.lionelsupport.com/media/servicedocuments/71-8910-250.pdf
Larry
Thanks, do you know where I can source one? And when I goggle that part number I get a picture that looks like a screw type bulb? Peep Figure 7:
https://www.lionelsupport.com/media/servicedocuments/71-8006-250.pdf
-
The lamp is #18-5101-139 in the Operating Instructions.
https://www.lionelsupport.com/media/servicedocuments/71-8910-250.pdf
Larry
-
(https://uploads.tapatalk-cdn.com/20201227/df1cfefe3f978021e84cc2d665db0328.jpg)
Ah ha!!!
Sent from my iPhone using Tapatalk
-
More pics for your reference (https://uploads.tapatalk-cdn.com/20201227/b48d4de34b929486f06d9cf57cd40f2f.jpg)
(https://uploads.tapatalk-cdn.com/20201227/b683562dd01a226515903fdbd2fb1870.jpg)
Sent from my iPhone using Tapatalk
-
Is it possible to replace the headlight in this unit? It has been intermittent this Christmas and now it’s totally out. (https://uploads.tapatalk-cdn.com/20201227/0f2b65f53c9ffc5b0a41f7024eb2c15a.jpg)
(https://uploads.tapatalk-cdn.com/20201227/03c8d0a4ae579263426135ce9b1394a9.jpg)
And where can I source one from? Also does the circuit board on the interior of the engine simply glue to the inside via some foam? Seems as if I rip it off how do I put it back correctly? Thanks on advance
Sent from my iPhone using Tapatalk