Lionel Train Forum - Lionel Trains

Author Topic: AEC 57 Switcher  (Read 218 times)


  • New Member
  • *
  • Posts: 2
  • Location: Pa
    • View Profile
AEC 57 Switcher
« on: September 21, 2019, 09:38:36 am »
I just purchased NIBox AEC 57 Lionel switcher from 1998 that appears to have never been run. I oiled all pivot points, greased the gears and cleaned the wheels. It ran a little sluggish so I put 2 drops of oil into the armature and it ran much better. I am still seeing a lot of sparks by the pickup rollers as I run the engine. Is this normal? What causes this?  I have an old 44 Lionel missile engine that also has a lot of sparking as I run the engine. Any thoughts?.....Rich

Share on Facebook Share on Twitter


  • Moderator
  • *****
  • Posts: 340
    • View Profile
  • Scale(s) Modeled: 0 scale
Re: AEC 57 Switcher
« Reply #1 on: September 21, 2019, 05:10:27 pm »
Welcome to the forum.

The first thing to do is clean all the wheels and the pickup rollers with 'Q' tips dipped in Naphtha to get them nice and clean. The next step is to clean all the track with a cloth wetted with Naphtha.

These procedures should limit the sparking that you see. Some sparking is normal.



Related Topics

  Subject / Started by Replies Last post
1 Replies
Last post March 25, 2017, 07:21:57 am
by djacobsen

Member Photos

Recent Threads

Re: Automating Switch Direction by TrainLarry
November 21, 2019, 08:54:27 am

Controller by Falconflyer
November 19, 2019, 05:30:50 pm

Automating Switch Direction by sjedwards
November 19, 2019, 12:51:23 pm

Re: Combining O gauge and O 27 by TrainLarry
November 18, 2019, 10:29:19 pm

Combining O gauge and O 27 by tim72
November 17, 2019, 04:15:39 pm


Donate to LTF Here

Lionel Trains

Lionel Train Forum - Model Train Forum